Effectively promoted catalytic activity by adjusting calcination temperature of Ce-Fe-Ox catalyst for NH3-SCR

A series of Ce-Fe-O_x catalysts prepared by the different calcination temperatures (marked as CF-X, where X represented calcination temperature) were used to the selectivity catalytic reduction of NO_x by NH₃. The results explained the relationship between calcination temperature and the sulfate species over Ce-Fe-O_x, and then investigated the surface acidity and catalytic performance. The large amounts of sulfate species were formed over CF-450 and CF-550 while it was decomposed with further the increasing of calcination temperature, which resulted in the loss of surface acidity, causing a decrease in the catalytic activity over Ce-Fe-O_x. Thereby, the CF-450 catalyst showed the best catalytic activity and over 90% NO_x conversion was obtained at 244–450 °C. Besides, the favored pore structure, more Fe³⁺ active species, higher Ce³⁺ concentration and the abundance of chemical adsorbed oxygen species, as well as the surface acid sites, would together contribute to the excellent catalytic activity of CF-450 catalyst.     

石英砂粒径对水合物沉积物力学性质的影响

利用自主研发的水合物沉积物原位合成与力学性质测试的高压低温三轴仪,通过多级加荷的试验方法,以不同粒径的砂粒作为沉积物骨架进行三轴压缩试验,得到了剪切过程的应力-应变关系曲线,以及不同粒径尺寸沉积物的强度,还有剪切过程中的体积变化关系。结果表明:含水合物沉积物强度随着沉积物粒径尺寸的增大而增强;在降压剪切过程中,所有粒径的水合物沉积物式样均有明显的剪缩现象。     

基于图像的二维剪纸自动生成方法

中国剪纸的设计极具挑战性, 要求画面简洁、直观, 还需要表达特定的文化内涵, 且整张剪纸须整体连通。提出了一种基于图像的二维剪纸自动生成方法, 能够将任意数码照片自动转化为剪纸图形。首先，利用图像分割方法建立区域连接图; 接着, 基于该连接图对颜色、边界对比度和区域连通性进行数学建模, 并获得优化目标函数; 最后, 通过模拟退火算法求解目标方程, 自动生成保持图像内容的剪纸图形。还开发了连通性后处理和区域指定等用户交互工具, 允许用户在自动生成的剪纸图形中方便地加入个人设计。实验表明, 所生成的剪纸图形画面简洁、整体连通。 本方法在降低剪纸设计难度的同时还可满足个性化的设计需求, 有助于传播和传承我国的民间剪纸艺术。     

Towards the meV limit of the effective neutrino mass in neutrinoless double-beta decays

We emphasize that it is extremely important for future neutrinoless double-beta(0νββ)decay experiments to reach the sensitivity to the effective neutrino mass|mββ|≈1 meV.With such a sensitivity,it is highly possible to discover the signals of 0νββ decays.If no signal is observed at this sensitivity level,then either neutrinos are Dirac particles or stringent constraints can be placed on their Majorana masses.In this paper,assuming the sensitivity of|mββ|≈1 meV for future 0νββ decay experiments and the precisions on neutrion oscillation parameters after the JUNO experiment,we fully explore the constrained regions of the lightest neutrino mass m1 and two Majorana-type CP-violating phases{ρ,σ}.Several important conclusions in the case of normal neutrino mass ordering can be made.First,the lightest neutrino mass is severely constrained to a narrow range m1∈[0.7,8]meV,which together with the precision measurements of neutrino mass-squared differences from oscillation experiments completely determines the neutrino mass spectrum m2∈[8.6,11.7]meV ing phases is limited to ρ∈[130°,230°],which cannot be obtained from any other realistic experiments.Third,the sum of three neutrino masses is found to beΣ≡m1+m2+m3∈[59.2,72.6]meV,while the effective neutrino mass for beta decays turns out to be mβ≡(|Ue1|2m1^2+|Ue2|2m2^2+|Ue3|2m3^2)1/2∈[8.9,12.6]meV.These observations clearly set up the roadmap for future non-oscillation neutrino experiments aiming to solve the fundamental problems in neutrino physics.     

Heterointerface Engineering of ZnO/CdS Heterostructures through ZnS Layers for Photocatalytic Water Splitting

Solar-driven water splitting to produce clean and renewable hydrogen offers a green strategy to address the energy crisis and environmental pollution. Heterostructure catalysts are receiving increasing attention for photocatalytic hydrogen generation. ZnO/ZnS/CdS and ZnO/CdS heterostructures have been successfully designed and prepared according to two different strategies. By introducing a heterointerface layer of ZnS between ZnO and CdS, a Z scheme charge-transfer channel was promoted and achieved superior photocatalytic performance. A highest hydrogen generation rate of 156.7 μmol g⁻¹ h⁻¹ was achieved by precise control of the thickness of the heterointerface layer and of the CdS shell. These findings demonstrated that heterostructures are promising catalysts for solar-driven water splitting, and that heterointerface engineering is an effective way to improve the photocatalytic properties of heterostructures.     

Daphnane Diterpenoids of Trigonostemon thyrsoideus

Chemistry of Natural Compounds -     

一带一路背景下企业地域影响力发展的规划研究

面对一个分布在新地理区域的新市场,合理规划区域服务影响力的发展战略对企业至关重要。本文假设企业的服务影响力在地理区域上的发展可以用其地理上分布的立足点来表示。单个立足点覆盖有限范围内的地理区域,并且在一个特定时刻用所有立足点所覆盖地理区域的总和来表示企业该时刻的发展状态。由于资源限制,企业对经济发展迅速的区域的覆盖必须在一定时间内逐步完成。因此,在发展时期内如何确定立足点的位置并使其位于知名城市中,是企业管理者亟待解决的问题。针对这个问题,本文首先基于时间序列预测方法建立了区域经济指标评估模型;然后使用集合覆盖理论提出了以成本和满意度为目标的选址优化模型并使用分支定界算法求解该模型;最后,使用从“一带一路”地区收集的数据对模型进行了检验。结果表明,该方法对有相关问题的企业具有较大的参考价值。     

接地式三要素型动力吸振器性能分析

利用固定点理论优化接地类型的动力吸振器得到的结果可能不是全局最优参数,在选择其他参数时主系统可以获得更小的振幅, 接地类型动力吸振器的优化问题值得进一步研究. 因此,以一种接地式三要素型动力吸振器为对象,通过研究系统参数变化对固 定点位置与主系统最大振幅的影响,得到了此吸振器的局部最优参数并分析了它的性能. 首先建立了此系统模型的运动微分方程, 得到了主系统振幅放大因子,发现系统存在3个与阻尼无关的固定点. 固定点中幅值较大点随系统参数变化的趋势可以代表最大振 幅随系统参数变化的趋势,因此利用盛金公式得到了固定点幅值的表达式. 为了更加精确,进一步使用数值算法得到了最大振幅与 系统参数的关系图,发现系统中存在局部最优参数. 通过对比接地式吸振器与接地三要素型吸振器的最大振幅随系统参数变化的趋 势,得到了接地式三要素型吸振器的局部最优参数,并发现当固有频率比小于局部最优频率比时,接地式三要素型吸振器模型主系 统的最大振幅要远小于接地式动力吸振器模型.      

ON THE CULTIVATION OF UNDERGRADUATE STUDENTS MAJORING MECHANICS BASED ON THE IDEA OF UNIVERSITY

21世纪信息技术、微纳米技术和生物技术等新兴领域的高速发展给力学专业的人才培养带来了机遇与挑战。本文简单介绍了高等教育的基本理念与发展及其在中国的演变。通过分析现阶段社会发展的需求和力学发展的趋势,阐述了力学本科的培养目标应该是具有宽广的人文素养和深厚的专业知识的创新型人才。本文结合上海大学二十余年来理论与应用力学本科人才培养的实际情况,对实现这一目标提出了几点参考建议。     

三次Gauss和及二项指数和的混合均值

我们用三角和的性质研究一类三次Gauss和与两项指数和混合均值的计算问题,并给出一个精确的计算公式.